2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 206-1, Concrete – Part 1: Specification, performance, production and conformity.
EN 1990, Eurocode – Basis of structural design.
EN 1991, Eurocode 1: Actions on structures.
EN 1992-1-1, Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
EN 1997-1, Eurocode 7: Geotechnical design - Part 1: General rules
EN 10025-2, Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels.
EN 10025-4, Hot rolled products of structural steels – Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.
EN 10079, Definition of steel products.
EN 10080, Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 10218-1, Steel wire and wire products – General - Part 1: Test methods.
EN 10218-2, Steel wire and wire products - General - Part 2: Wire dimensions and tolerances.
EN 10223-3, Steel wire and wire products for fences - Part 3: Hexagonal steel wire netting for engineering purposes.
EN 10223-4, Steel wire and wire products for fences - Part 4: Steel wire welded mesh facing.
EN 10244-1, Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles.
EN 10244-2, Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings.
EN 10245-1, Steel wire and wire products - Organic coatings on steel wire – Part 1: General rules.
EN 10245-2, Steel wire and wire products - Organic coatings on steel wire – Part 2: PVC finished wire.
EN 10245-3, Steel wire and wire products - Organic coatings on steel wire – Part 3: PE coated wire.
EN 10326, Continuously hot-dip coated strip and sheet of structural steels – Technical delivery conditions.
EN 12224, Geotextiles and geotextile-related products – Determination of the resistance to weathering.
EN 12225, Geotextiles and geotextile-related products – Method for determining the microbiological resistance by a soil burial test.
EN 13251, Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures.
EN ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999)
EN ISO 1461, Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:1999)
EN ISO 2063, Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005)
EN ISO 10320, Geotextiles and geotextile-related products – identification on site (ISO 10320:1999).
ENV ISO 10722-1, Geotextiles and geotextile-related products - Procedure for simulating damage during installation - Part 1: Installation in granular materials (ISO 10722-1:1998)
EN ISO 12957-1, Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO 12957-1:2005)
EN ISO 13431, Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999)
